Vilros Getting Started with MicroPython on Raspberry Pi Pico Kit

This is the Getting Started with MicroPython on Raspberry Pi Pico This kit includes everything you need to immerse yourself in the world of MicroPython with the Raspberry Pi Pico Parts & Components: 1 × Raspberry Pi Pico with Presoldered male headers attached Get started with MicroPython on Raspberry Pi Pico Booklet 30 × Jumper wires 10x male-to-female, 10x male-to-male, 10x female-to-female1 x Battery Holder and Breadboard Panel Holds the Breadboard and Battery Holder in place for an easy and neat wiring experience. 1 × Full Size (800 Hole) Solderless breadboard 12 × Assorted Color LEDs: 3 AA Battery Holder with Micro USB Connector 1x 10x7" Neoprene Parts Storage Case with Pocket 1 × USB Type-A to Micro Type-B 2.0 Cable 1 × 3 Pin header. 5 × Push-button switches. 10 × 330 Ω resistors. 1 × Active piezoelectric buzzer. 2 × 10 kΩ potentiometer. 1 × HC-SR501 PIR sensor. 1 × I2C 1602 LCD module. 1 × WS2812B LED strip. 1 × Clear hard plastic box for small part storage 1x Raspberry Pi Pico Pinout Guide1 x Picoboat Keychain Case Raspberry Pi Pico Specs: 21 mm × 51 mm form factor RP2040 microcontroller chip designed by Raspberry Pi in the UK Dual-core Arm Cortex-M0+ processor, flexible clock running up to 133 MHz 264KB on-chip SRAM 2MB on-board QSPI Flash 26 multifunction GPIO pins, including 3 analogue inputs 2 × UART, 2 × SPI controllers, 2 × I2C controllers, 16 × PWM channels 1 × USB 1.1 controller and PHY, with host and device support 8 × Programmable I/O (PIO) state machines for custom peripheral support Supported input power 1.8–5.5V DC= Drag-and-drop programming using mass storage over USB Accurate on-chip clock Temperature sensor Accelerated integer and floating-point libraries on

• Vilros Getting Started With MicroPython on Raspberry Pi Pico Kit
• LEARN TO PROGRAM: 48 Page Full Color Guide features clear instructions with screenshots and covers: Getting to know your Pico, Programming with MicroPython, Physical computing, More Pico projects--Also Includes a Pin Reference Card for easy Pico Wiring
• CUSTOM PICO PARTS: Includes Battery Holder with Micro USB connector to power on the go, USB Cable to connect to a PC and program and a Panel to neatly hold the breadboard and battery holder for a neat and easy wiring experience
• STORE AND CARRY: Includes a Picoboat case to protect your pico when not in use and also includes a neoprene bag to store all the parts of the kit neatly
• HIGH QUALITY COMPONENTS: Includes 30 × Jumper wire variety --1 × Full Size (800 Hole) Solderless breadboard--12 × Assorted Color LEDs: ---5 × Push-button switches--10 × 330 Ω resistors--1 × Active piezoelectric buzzer--2 × 10 kΩ potentiometer--1 × HC-SR501 PIR sensor--1 × I2C 1602 LCD module--1 × WS2812B LED strip-- All Packed in a Clear hard plastic box for small part storage